20. November 2026
IEDM, Here We Come!
At this year’s IEEE International Electron Devices Meeting (December 12–16, San Francisco), GTS scientists are co-authors of the paper “Monolithic CMOS Integration of Reconfigurable FET Hybrid Circuits for Secure Edge Applications,” a joint work of GlobalFoundries Dresden, NaMLab gGmbH, Global TCAD Solutions, THM University of Applied Sciences, Universitat Rovira i Virgili, and TU Dresden.
First Monolithic Integration of TIG-RFETs and CMOS in FDSOI
The paper reports the first monolithic integration of three-independent-gate reconfigurable FETs (TIG-RFETs) with standard CMOS transistors in an FDSOI technology, without negatively affecting the baseline technology. Since an RFET can be electrically programmed to operate as either an n-type or a p-type device, the two transistor types together form hybrid logic cells with polymorphic functionality, which is of particular interest for hardware security in low-power edge devices.
Transient Simulations of the Cell Operation
Our part in this collaboration is the TCAD side. José María González Medina, Sophie Schallert, and Oskar Baumgartner carried out the DTCO study, which analyzes the impact of channel length scaling on the reconfigurable devices, extracts the parasitics of the hybrid cells, and provides transient simulations of the cell operation. These transient curves are an important element of our contribution, since they give direct access to the switching behavior and timing of the hybrid cells at the simulation level. Together with the TIG-RFET compact model presented in the paper, which for the first time includes intrinsic capacitances, the study provides the modeling basis for standard-cell characterization and for the circuit demonstrator, a PRESENT substitution box with increased resistance to side-channel attacks.
Presentation at IEDM 2026
The paper (16-1) will be presented in Session 16, “Novel Computing Paradigms,” on Tuesday, December 15, 9:05–9:30 AM PST, in room Continental 6 at the Hilton San Francisco Union Square. If you are attending IEDM and work on reconfigurable devices, DTCO, or hardware security, we recommend the talk and look forward to the discussion afterwards.
Thanks
Many thanks to all co-authors for the excellent collaboration.
This work was supported by the German Federal Ministry of Research, Technology and Space (BMFTR) within the project DI-ReDesign and by the European Union under grant agreement No. 101135316 (SENSOTERIC).
For more information about the SENSOTERIC project, visit http://sensoteric.eu/
For more information about IEDM, visit https://ieee-iedm.org//